Frontiers in Materials | Mechanics of Materials

Original Research

Accepted on 06 Aug 2025

Study on the Mechanism and Control of Ground Subsidence Induced by Solution Mining in Guangzhou Longgui Nitrate-Salt Mine

in Mechanics of Materials

Jian Chen
Xuchao Liu
Jinsen Liu
Pan Wang

Frontiers in Materials

doi 10.3389/fmats.2025.1630238

181 views

Original Research

Accepted on 06 Aug 2025

Study on Shear-Thickening-Assisted Abrasive Lapping and Polishing of SiC Ceramic Substrate: Parameter Optimization and Surface Quality Evaluation

in Mechanics of Materials

Fangwei Pan
Haiyang Yuan
Hongwei Shi
Zheng Fang
Yibo Huang
Youbin Lin
Jixuan Wu

Frontiers in Materials

doi 10.3389/fmats.2025.1649115

175 views

Original Research

Published on 01 Aug 2025

Energy dissipation during a rockfall and mechanical response of an energy dissipation structure

in Mechanics of Materials

De-jie Li
Fu-xiang Chen
Pei-shuai Chen
Jing Xiao

Frontiers in Materials

doi 10.3389/fmats.2025.1650680

892 views

Original Research

Published on 30 Jul 2025

Interface stress control mechanism of engineering plastic gaskets during the low-amplitude and long-pulse-width dynamic loading process

in Mechanics of Materials

Feng Xu
Jianwei Jiang
Jianbin Men
Shuyou Wang
Mei Li

Frontiers in Materials

doi 10.3389/fmats.2025.1616537

791 views

Original Research

Published on 30 Jul 2025

Analysis of the physical and mechanical properties of coal-based solid waste filling material at early ages

in Mechanics of Materials

Zheng Wu
Lizhen Xu
Chang Xin
Wen Zhang

Frontiers in Materials

doi 10.3389/fmats.2025.1566391

822 views

Original Research

Published on 30 Jul 2025

Differential quadrature free vibration analysis of sandwich plates with curvilinear fiber variable stiffness composite face sheets

in Mechanics of Materials

Zhenyu Zhou

Frontiers in Materials

doi 10.3389/fmats.2025.1601813

841 views

Original Research

Published on 24 Jul 2025

Mechanistic study on mechanical strengthening in As-extruded Mg-xSn (x = 0.5, 2, 4, 6 and 8 wt%) alloys

in Mechanics of Materials

Tingting Song
Fu Yang
Xiaowei Niu
Zheng Jia

Frontiers in Materials

doi 10.3389/fmats.2025.1639947

1,173 views

Original Research

Published on 18 Jul 2025

Analysis of the mechanical behaviors of nonmetallic un-bonded flexible pipe under different loads

in Mechanics of Materials

Jin Yu
Xuegang You
Tianwei Kong
Mengying Xia
Ruhong Lv
Kezheng Zhang
Baodong Wang

Frontiers in Materials

doi 10.3389/fmats.2025.1560428

646 views

Original Research

Published on 16 Jul 2025

Testing the mechanical performance of a single taper-retained implant–abutment connection under static and dynamic loads: an in vitro study

in Mechanics of Materials

Hao Wu
Ning Cao
Liang-Wei Cao
Shui-Gen Guo
Xu Zhang
Fei Yu
Shi-Bo Wei
Hong-Wu Wei

Frontiers in Materials

doi 10.3389/fmats.2025.1625770

746 views

Original Research

Published on 10 Jul 2025

Effect of different fly ash ratios on the mechanical properties of hybrid steel fiber reinforced concrete

in Mechanics of Materials

Necim Kaya

Frontiers in Materials

doi 10.3389/fmats.2025.1585291

914 views

Original Research

Published on 02 Jul 2025

Development of micromechanical model of asphalt mixture in complex form for dynamic modulus characterization

in Mechanics of Materials

Bin Liu
Junlin Yang
Kai Zhang
Xiangyang Fan

Frontiers in Materials

doi 10.3389/fmats.2025.1594770

632 views

Original Research

Published on 27 Jun 2025

Research and optimization on the strength recovery mechanism of post peak fragmentation grouting reinforcement in mining rock mass

in Mechanics of Materials

Zhang Shuai
Sun Yao
Cao Jiantao
Lai Xingping
Wu Longquan

Frontiers in Materials

doi 10.3389/fmats.2025.1612050

905 views

Original Research

Published on 27 Jun 2025

Effect of unloading confining pressure rates on macroscopic and microscopic mechanisms in diorite based on PFC3D

in Mechanics of Materials

Xuexu An
Juan Huang
Xiaoxiao Duan
Dengke Yang

Frontiers in Materials

doi 10.3389/fmats.2025.1550403

857 views

Original Research

Published on 27 Jun 2025

Mechanical properties of 3D-Printed aluminum, nickel, and titanium using a hybrid machine learning and computational mechanics approach

in Mechanics of Materials

Sara Samine
Mohamed Karouchi
Maria Zemzami
Nabil Hmina
Soufiane Belhouideg

Frontiers in Materials

doi 10.3389/fmats.2025.1584896

1,463 views

Original Research

Published on 26 Jun 2025

Low-velocity impact resistance of double arrowhead triangular structure with negative Poisson’s ratio

in Mechanics of Materials

Liu Xinting
Luo Wei
Xu Feiyan
Yang Yahui
Li Yangbo

Frontiers in Materials

doi 10.3389/fmats.2025.1435381

635 views

Original Research

Published on 10 Jun 2025

Mechanical behaviour and fracture mechanism of coal mine roadway surrounding rock considering seepage field

in Mechanics of Materials

Shujie Zhao
Yian Chen
Wensong Xu
Jiang Xu
Xiang Cheng

Frontiers in Materials

doi 10.3389/fmats.2025.1612136

863 views