Frontiers in Materials | Mechanics of Materials

Original Research

Published on 21 Mar 2024

Onsite and laboratory assessment of repair mortars for reinforced concrete floor slabs in heritage buildings

in Mechanics of Materials

Elisa Franzoni
Cesare Pizzigatti

Frontiers in Materials

doi 10.3389/fmats.2024.1370921

3,889 views
2 citations

Editorial

Published on 12 Mar 2024

Editorial: Recent advances in the identification of stress-strain states of materials

in Mechanics of Materials

Marta Harničárová
Jan Valíček
Vladimír Šepeľák

Frontiers in Materials

doi 10.3389/fmats.2024.1393286

2,697 views
1 citation

Correction

Published on 06 Mar 2024

Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

in Mechanics of Materials

Hongming Zheng
Li Xu
Yang Jiao
Yan Xia
Xinglin Wu
Kaihang Lu
Pengpeng Zhang
Quanming Zhao
Lu Zhang
Xiaohui Ni

Frontiers in Materials

doi 10.3389/fmats.2024.1388987

1,072 views

Original Research

Published on 01 Mar 2024

Free vibration analysis of functionally graded graphene platelet-reinforced metal foam doubly curved panel

in Mechanics of Materials

Li-Li Zhang
Li-Cai Zhao
Song-Jun Lang
Kamran Asemi

Frontiers in Materials

doi 10.3389/fmats.2024.1339865

3,422 views
14 citations

Original Research

Published on 16 Feb 2024

Fractional derivative-based normalized viscoelastic model of strain-hardening clays

in Mechanics of Materials

Yin Tang
Peng Wang
Peng Ren
Hua Zhang

Frontiers in Materials

doi 10.3389/fmats.2024.1338251

2,476 views
3 citations

Original Research

Published on 29 Jan 2024

Electrical conductivity analysis of extrusion-based 3D-printed graphene

in Mechanics of Materials

Hushein R
Mohamed Iqbal Shajahan
Robert Čep
Sachin Salunkhe
Arun Prasad Murali
Gawade Sharad
Hussein Mohamed Abdelmoneam Hussein
Emad Abouel Nasr

Frontiers in Materials

doi 10.3389/fmats.2024.1328347

4,500 views
2 citations

Original Research

Published on 26 Jan 2024

Numerical analysis on dynamic response and damage threshold characterization of deep rock mass under blasting excavation

in Mechanics of Materials

Qi Zong
Nao Lv
Haibo Wang
Jichao Duan

Frontiers in Materials

doi 10.3389/fmats.2024.1329549

3,591 views
2 citations

Original Research

Published on 25 Jan 2024

Laser ultrasonic time-domain synthetic aperture focusing (SAFT) co-overlay software and hardware (COSH) computing system based on ZYNQ

in Mechanics of Materials

Junfu Tan
Chenyin Ni
Chanjuan Wu
Kaining Ying
Lunan Dai
Zhonghua Shen

Frontiers in Materials

doi 10.3389/fmats.2023.1283151

3,219 views
2 citations

Original Research

Published on 15 Jan 2024

Numerical simulation on dynamic compression properties of sandstone under axial static preload

in Mechanics of Materials

Ying Xu
Zhongyi Zhang
Chengjie Li
Jinjin Ge

Frontiers in Materials

doi 10.3389/fmats.2023.1338348

2,674 views
4 citations

Original Research

Published on 12 Jan 2024

Experimental and numerical simulation study on coupling tripping of partial trapezoidal threaded casing head and casing coupling

in Mechanics of Materials

Jun Zhang
Chao Ding
Yanan Li
Hai Dong
Madi Ayala
Mingzhi Li

Frontiers in Materials

doi 10.3389/fmats.2023.1337721

2,092 views

Original Research

Published on 08 Jan 2024

Novel study on investigating the mechanical, microstructure morphological, and dry sliding wear characteristics of grey cast iron GG25 with copper additions for valve guides in internal combustion engine

in Mechanics of Materials

Baljeet Singh
Jasmaninder Singh Grewal
Rajeev Kumar
Shubham Sharma
Abhinav Kumar
Kahtan A. Mohammed
Fuad A. Awwad
M. Ijaz Khan
Emad A. A. Ismail

Frontiers in Materials

doi 10.3389/fmats.2023.1293254

21,797 views
6 citations

Editorial

Published on 05 Jan 2024

Editorial: Innovators in mechanics of materials

in Mechanics of Materials

Seunghwa Ryu
Geoffrey Robert Mitchell
Antonio Caggiano
Raul A. Radovitzky
Patrizia Trovalusci
Nicola Maria Pugno

Frontiers in Materials

doi 10.3389/fmats.2023.1346034

2,459 views

Original Research

Published on 22 Dec 2023

Compressive mechanical properties of cottonseed

in Mechanics of Materials

Yuanzhao Zheng
Meng Wang
Xintian Du
Hongwen Zhang
Lei Wang
Ximei Wei
Xuewen Fu
Jun Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1322301

4,737 views

Editorial

Published on 20 Dec 2023

Editorial: Mechanical properties of advanced materials and structures for energy absorption

in Mechanics of Materials

Xin Zhang
Xinmei Xiang

Frontiers in Materials

doi 10.3389/fmats.2023.1343791

3,144 views
1 citation

Original Research

Published on 14 Dec 2023

Rock fragmentation size distribution control in blasting: a case study of blasting mining in Changjiu Shenshan limestone mine

in Mechanics of Materials

Pengfei Gao
Cheng Pan
Qi Zong
Chunliang Dong

Frontiers in Materials

doi 10.3389/fmats.2023.1330354

7,645 views
14 citations

Original Research

Published on 14 Dec 2023

Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

in Mechanics of Materials

Hongming Zheng
Li Xu
Yang Jiao
Yan Xia
Xinglin Wu
Kaihang Lu
Pengpeng Zhang
Quanming Zhao
Lu Zhang
Xiaohui Ni

Frontiers in Materials

doi 10.3389/fmats.2023.1325997

4,598 views
3 citations

Original Research

Published on 11 Dec 2023

Residual strain measurement based on longitudinal to shear wave velocity ratio with a dual-mode EMAT

in Mechanics of Materials

Geng Dang
Cuixiang Pei
Zhanfeng Yang
Haiqiang Zhou

Frontiers in Materials

doi 10.3389/fmats.2023.1273190

3,118 views
2 citations

Original Research

Published on 01 Dec 2023

Effects of using different materials at interface of trapezoidal reinforced concrete infilled frames–analytical and experimental approaches

in Mechanics of Materials

Mugunth Vishali
Alireza Bahrami
Kachabeswara Srinivasan Satyanarayanan
Varatharajan Thirumurugan
Murugan Prakash

Frontiers in Materials

doi 10.3389/fmats.2023.1239312

2,431 views
3 citations

Original Research

Published on 22 Nov 2023

Post-consolidation process for modifying microscale and mesoscale parameters of 3D printed composite materials

in Mechanics of Materials

Arief Yudhanto
Alwaleed Aldhirgham
Eric Feron
Gilles Lubineau

Frontiers in Materials

doi 10.3389/fmats.2023.1286840

2,839 views
5 citations

Original Research

Published on 22 Nov 2023

Bio-inspired hierarchical polymer micro- and nanostructures for anti-adhesion applications

in Mechanics of Materials

Cristina Plamadeala
Sebastian Lifka
Gerda Buchberger
Werner Baumgartner
Johannes Heitz

Frontiers in Materials

doi 10.3389/fmats.2023.1281992

3,163 views
4 citations

Original Research

Published on 07 Nov 2023

Experimental study into the propagation and attenuation of blasting vibration waves in porous rock-like materials

in Mechanics of Materials

Ge Lu
Yuhang Tao

Frontiers in Materials

doi 10.3389/fmats.2023.1284158

2,335 views
2 citations

Original Research

Published on 03 Nov 2023

Study on mechanical properties and microstructure of steel-polypropylene fiber coal gangue concrete

in Mechanics of Materials

Jiuyang Li
Li Chen
Jingwei Luo
Yuepeng Zhu
Xinmei Fan
Guangchao Hu

Frontiers in Materials

doi 10.3389/fmats.2023.1281372

2,610 views
7 citations

Original Research

Published on 17 Oct 2023

FDEM investigation on the crack propagation characteristics of walnut shell under multi-contact loadings

in Mechanics of Materials

Bowen Han
Gege Su
Yong Zeng
Jialong Yang
Xiuwen Fan
Yongcheng Zhang
Hong Zhang
Jianping Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1293683

9,159 views
9 citations

Original Research

Published on 12 Oct 2023

The protective performance of rubber pads for penetration fuze

in Mechanics of Materials

Libo Ding
An Zhang
Junwei Peng
Changsheng Li

Frontiers in Materials

doi 10.3389/fmats.2023.1284738

3,164 views
4 citations

329 articles

articles

Onsite and laboratory assessment of repair mortars for reinforced concrete floor slabs in heritage buildings

Editorial: Recent advances in the identification of stress-strain states of materials

Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

Free vibration analysis of functionally graded graphene platelet-reinforced metal foam doubly curved panel

Fractional derivative-based normalized viscoelastic model of strain-hardening clays

Electrical conductivity analysis of extrusion-based 3D-printed graphene

Numerical analysis on dynamic response and damage threshold characterization of deep rock mass under blasting excavation

Laser ultrasonic time-domain synthetic aperture focusing (SAFT) co-overlay software and hardware (COSH) computing system based on ZYNQ

Numerical simulation on dynamic compression properties of sandstone under axial static preload

Experimental and numerical simulation study on coupling tripping of partial trapezoidal threaded casing head and casing coupling

Novel study on investigating the mechanical, microstructure morphological, and dry sliding wear characteristics of grey cast iron GG25 with copper additions for valve guides in internal combustion engine

Editorial: Innovators in mechanics of materials

Compressive mechanical properties of cottonseed

Editorial: Mechanical properties of advanced materials and structures for energy absorption

Rock fragmentation size distribution control in blasting: a case study of blasting mining in Changjiu Shenshan limestone mine

Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

Residual strain measurement based on longitudinal to shear wave velocity ratio with a dual-mode EMAT

Effects of using different materials at interface of trapezoidal reinforced concrete infilled frames–analytical and experimental approaches

Post-consolidation process for modifying microscale and mesoscale parameters of 3D printed composite materials

Bio-inspired hierarchical polymer micro- and nanostructures for anti-adhesion applications

Experimental study into the propagation and attenuation of blasting vibration waves in porous rock-like materials

Study on mechanical properties and microstructure of steel-polypropylene fiber coal gangue concrete

FDEM investigation on the crack propagation characteristics of walnut shell under multi-contact loadings

The protective performance of rubber pads for penetration fuze