Original Research
Published on 09 Feb 2024
Thermal fatigue analysis and structural optimization of sliding composite leaf spring
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1353274
- 2,643 views
Type at least 3 characters
922 articles
Original Research
Published on 08 Feb 2024
Effect of interface treatment on the flexural performance of existing RC bridge beams strengthened with UHPC
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1361647
- 2,974 views
- 1 citation
Original Research
Published on 07 Feb 2024
An improved approach for the continuous retardation spectra of concrete creep and applications
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1340883
- 2,890 views
Original Research
Published on 06 Feb 2024
Study on the monitoring method of debonding between concrete beams and reinforced steel plates based on piezoelectric smart materials
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1361159
- 2,122 views
Original Research
Published on 06 Feb 2024
The influence of basalt fiber on the mechanical performance of concrete-filled steel tube short columns under axial compression
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1332269
- 2,902 views
- 29 citations
Original Research
Published on 06 Feb 2024
Harnessing the joint effect of approach bridges in arch bridge construction: an analytical study on thrust stiffness and elevation error mitigation
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1321177
- 2,196 views
Original Research
Published on 05 Feb 2024
An modified intelligent real-time crack detection method for bridge based on improved target detection algorithm and transfer learning
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1351938
- 4,499 views
- 6 citations
Original Research
Published on 05 Feb 2024
Experimental analysis and modeling of micro-texture and vickers hardness impact on polished stone value in high-friction aggregates
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1340828
- 1,774 views
- 2 citations
Original Research
Published on 02 Feb 2024
Experimental study on wear failure of spindle hook teeth of cotton picker
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1309617
- 1,713 views
Original Research
Published on 29 Jan 2024
Effect of tungsten contents on the jet penetration performance of shaped charge liner based copper-tungsten composites
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1308290
- 3,707 views
- 2 citations
Original Research
Published on 19 Jan 2024
Cracking characteristics evaluation for reinforcement basalt fiber reactive powder concrete beam using acoustic emission
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1346140
- 2,244 views
- 1 citation
Original Research
Published on 19 Jan 2024
Numerical investigation on effect of different projectile nose shapes on ballistic impact of additively manufactured AlSi10Mg alloy
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1330597
- 2,587 views
- 5 citations
Review
Published on 12 Jan 2024
A review study on axial compression properties of UHPC columns confined by FRP
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1339386
- 2,604 views
- 2 citations
Original Research
Published on 12 Jan 2024
Performance of high-belite calcium sulfoaluminate cement subjected to hydrochloric acid and sulfuric acid
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1282919
- 1,366 views
- 4 citations
Original Research
Published on 11 Jan 2024
Failure modes and mechanical properties of double-layer rock-like composite specimens with a single fissure under triaxial compression
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1352243
- 1,913 views
Editorial
Published on 11 Jan 2024
Editorial: Nanoscale insight into the hydration products of cementitious materials: from theory to engineering
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2023.1356717
- 1,056 views