Frontiers in Materials

Original Research

Published on 14 Nov 2024

Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age

Yueying Zhang
Huizhen Liang
Shanshan Fei
Aijun Zhang
Juan Yu
Xuebin Qin

Frontiers in Materials

doi 10.3389/fmats.2024.1428859

1,465 views

Original Research

Published on 13 Nov 2024

Assessment of the self-healing capacity of PVA fiber-reinforced composites by chloride permeability and stiffness recovery

Urs Buegger
Eliane Betania Carvalho
Ralf Jänicke
Thamara Tofeti Lima

Frontiers in Materials

doi 10.3389/fmats.2024.1443216

1,541 views
1 citation

Original Research

Published on 13 Nov 2024

Improvement of dispersants on nano carbon black-modified cement paste: performance, microstructure and carbon footprint

Hui Wang
Chenjiang Li
Haixiang Gao
Yan Zhao
Handuo Xia
Cong Zhou
Shunjie Zhong
Qingxin Zhao

Frontiers in Materials

doi 10.3389/fmats.2024.1509077

2,180 views
3 citations

Original Research

Published on 13 Nov 2024

Effect of recycled molybdenum tailings on mechanical properties of ultra-high-performance concrete

Xin Li
Cun-Xiang Liu
Xin-Yu Zhao
Shao-Bo Kang

Frontiers in Materials

doi 10.3389/fmats.2024.1483446

2,040 views
4 citations

Original Research

Published on 12 Nov 2024

Analysis of damage characteristics of reinforced concrete slabs under explosive impact and research on CFRP reinforcement

Junxia Lian
Dongjie Li
Haonan Zhao

Frontiers in Materials

doi 10.3389/fmats.2024.1480206

2,250 views
1 citation

Original Research

Published on 12 Nov 2024

Manifestations in nature of self-controlled quasi-stationary nuclear fusion into magnetized low-temperature hydrogen plasma

Vladimir Vysotskii
Mykhaylo Vysotskyy

Frontiers in Materials

doi 10.3389/fmats.2024.1502051

1,721 views

Editorial

Published on 12 Nov 2024

Editorial: Biomass conversion and biomass-derived carbon-based materials for remediation of emerging pollutants in soil and water

Kuppusamy Sathishkumar
Aruliah Rajasekar
Saraschandra Naraginti
Gajendra Kumar Gaurav
Tariq Mehmood

Frontiers in Materials

doi 10.3389/fmats.2024.1517479

1,379 views

Original Research

Published on 11 Nov 2024

Towards dynamic multiscale feedback during the injection moulding cycle of plastics

Anabela P. Massano
Patricio Vargas
Pedro Carreira
Joao Matias
Marc Malfois
Paulo J. Novo
Pedro Martinho
Antonio Pontes
Geoffrey R. Mitchell

Frontiers in Materials

doi 10.3389/fmats.2024.1466753

2,854 views

Editorial

Published on 07 Nov 2024

Editorial: Advanced in situ characterization of biological interfaces and materials

Jong Seto
Behzad Rad
Jinhui Tao
Rizhi Wang

Frontiers in Materials

doi 10.3389/fmats.2024.1472269

1,373 views

Original Research

Published on 07 Nov 2024

High-performance optoelectronic devices based on TeOx nanowires: synthesis, characterization and photodetection

Jinggao Sui
Xiang Lan
Baihui Zhang
Mianzeng Zhong
Guang Wang
Jinhui Cao

Frontiers in Materials

doi 10.3389/fmats.2024.1497540

1,606 views

Original Research

Published on 05 Nov 2024

Solar light driven photochromic membranes with viologen additives in PVDF/PVP matrix

Jahan Tohtayeva
Sinem Altınışık
Mert Akgün
Filiz Uğur Nigiz
Sermet Koyuncu

Frontiers in Materials

doi 10.3389/fmats.2024.1490273

2,086 views
2 citations

Original Research

Published on 05 Nov 2024

2D heterostructures of graphene oxide and MoS2 to improve sensitivity performance of flexible pressure sensor with shell biological structure

Zheyu Hu
Dabing Zhang
Yuning Zhou

Frontiers in Materials

doi 10.3389/fmats.2024.1387699

3,184 views
1 citation

Original Research

Published on 01 Nov 2024

Optimization of entrainment and interfacial flow patterns in countercurrent air-water two-phase flow in vertical pipes

Yongzhi Wang
Feng Luo
Zichen Zhu
Ruijie Li
Mohammad Sina

Frontiers in Materials

doi 10.3389/fmats.2024.1454922

1,995 views
2 citations

Original Research

Published on 01 Nov 2024

Assessment of mechanical performance of sustainable structural mud insulated panels

Asad Khan
Mohammad Adil
Danhui Dan
Muhammad Adeel Khan
Mahmood Ahmad
Muhammad Salman Khan
Mohanad Muayad Sabri Sabri

Frontiers in Materials

doi 10.3389/fmats.2024.1495750

2,885 views
1 citation

Original Research

Published on 31 Oct 2024

Phenacyl bromide as Norrish type I photoinitiator for the facile synthesis of chain-end functional PMMA and polystyrene

Mina Kati
Yusra Bahar Cakir
Kerem Kaya
Huseyin Cem Kiliclar
Baris Kiskan

Frontiers in Materials

doi 10.3389/fmats.2024.1490070

3,509 views
2 citations

Original Research

Published on 30 Oct 2024

Study on the mechanical properties of PES-HmA samples printed by selective laser sintering under various pre-heating conditions

Chengbo Guo
Yanling Guo
Jian Li
Yangwei Wang
Jiaming Dai

Frontiers in Materials

doi 10.3389/fmats.2024.1480043

1,701 views

Original Research

Published on 30 Oct 2024

Hydrogel composition and mechanical stiffness of 3D bioprinted cell-loaded scaffolds promote cartilage regeneration

Ge Liu
Xiaowei Wei
Junlei Li
Yun Zhai
Jingrun Zhang
Ming Jin
Tianmin Guan
Dewei Zhao

Frontiers in Materials

doi 10.3389/fmats.2024.1501505

1,838 views

Original Research

Published on 30 Oct 2024

Superconductivity in mercurides of strontium

Rachel Nixon
Yurii Prots
Mitja Krnel
Nazar Zaremba
Orest Pavlosiuk
Marcus Schmidt
Lev Akselrud
Yuri Grin
Eteri Svanidze

Frontiers in Materials

doi 10.3389/fmats.2024.1470878

2,370 views
2 citations

Original Research

Published on 29 Oct 2024

Potential for material valorization of composites (glass fiber in polyester resin) in concrete: performance evaluation on mortar

Agnès Zambon
Mylène Deleglise-Lagardere

Frontiers in Materials

doi 10.3389/fmats.2024.1416647

1,742 views

Review

Published on 28 Oct 2024

Frost resistance and improvement techniques of recycled concrete: a comprehensive review

Quan Ma
Zhenhua Duan
Jun Wang
Gang Yin
Xi Li

Frontiers in Materials

doi 10.3389/fmats.2024.1493191

3,713 views
9 citations

Original Research

Published on 28 Oct 2024

Exploring fungal potential for microbial-induced calcite precipitation (MICP) in bio-cement production

Inderpal Devgon
Rohan Samir Kumar Sachan
Khushboo Rajput
Mukesh Kumar
Abdel Rahman Mohammad Said Al-Tawaha
Arun Karnwal
Tabarak Malik

Frontiers in Materials

doi 10.3389/fmats.2024.1396081

4,012 views
5 citations

Original Research

Published on 28 Oct 2024

Electrophoretic deposition of polyetheretherketone/polytetrafluoroethylene on 316L SS with improved tribological and corrosion properties for biomedical applications

Ayman Imran
Rizwan Ahmed Malik
Hussein Alrobei
Muhammad Atiq Ur Rehman

Frontiers in Materials

doi 10.3389/fmats.2024.1473032

3,387 views
7 citations

Original Research

Published on 25 Oct 2024

Influence of polypropylene fiber length and geometric shape on the compressive strength of cemented lepidolite tailings backfill

Liping Zuo
Nanhui Huang
Genwei Wang
Daopei Zhu

Frontiers in Materials

doi 10.3389/fmats.2024.1452843

1,223 views
1 citation

Original Research

Published on 24 Oct 2024

Various configurations of externally bonded strain-hardening cementitious composite reducing shear failure risk of defected RC beams

Alireza Bahrami
Mohamed Ghalla
Galal Elsamak
Moataz Badawi
Ehab A. Mlybari
Fathi A. Abdelmgeed

Frontiers in Materials

doi 10.3389/fmats.2024.1373292

2,259 views
32 citations

3,862 Publications

volumes

Volume 11 - 2024

Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age

Assessment of the self-healing capacity of PVA fiber-reinforced composites by chloride permeability and stiffness recovery

Improvement of dispersants on nano carbon black-modified cement paste: performance, microstructure and carbon footprint

Effect of recycled molybdenum tailings on mechanical properties of ultra-high-performance concrete

Analysis of damage characteristics of reinforced concrete slabs under explosive impact and research on CFRP reinforcement

Manifestations in nature of self-controlled quasi-stationary nuclear fusion into magnetized low-temperature hydrogen plasma

Editorial: Biomass conversion and biomass-derived carbon-based materials for remediation of emerging pollutants in soil and water

Towards dynamic multiscale feedback during the injection moulding cycle of plastics

Editorial: Advanced in situ characterization of biological interfaces and materials

High-performance optoelectronic devices based on TeOx nanowires: synthesis, characterization and photodetection

Solar light driven photochromic membranes with viologen additives in PVDF/PVP matrix

2D heterostructures of graphene oxide and MoS2 to improve sensitivity performance of flexible pressure sensor with shell biological structure

Optimization of entrainment and interfacial flow patterns in countercurrent air-water two-phase flow in vertical pipes

Assessment of mechanical performance of sustainable structural mud insulated panels

Phenacyl bromide as Norrish type I photoinitiator for the facile synthesis of chain-end functional PMMA and polystyrene

Study on the mechanical properties of PES-HmA samples printed by selective laser sintering under various pre-heating conditions

Hydrogel composition and mechanical stiffness of 3D bioprinted cell-loaded scaffolds promote cartilage regeneration

Superconductivity in mercurides of strontium

Potential for material valorization of composites (glass fiber in polyester resin) in concrete: performance evaluation on mortar

Frost resistance and improvement techniques of recycled concrete: a comprehensive review

Exploring fungal potential for microbial-induced calcite precipitation (MICP) in bio-cement production

Electrophoretic deposition of polyetheretherketone/polytetrafluoroethylene on 316L SS with improved tribological and corrosion properties for biomedical applications

Influence of polypropylene fiber length and geometric shape on the compressive strength of cemented lepidolite tailings backfill

Various configurations of externally bonded strain-hardening cementitious composite reducing shear failure risk of defected RC beams