Correction
Published on 26 Mar 2024
Corrigendum: A cytocompatible microporous Sr-doped titanium dioxide coating fabricated by plasma electrolytic oxidation
Frontiers in Materials
doi 10.3389/fmats.2024.1397851
- 1,502 views
3,866 Publications
volumes
Volume 11 - 2024
Original Research
Published on 26 Mar 2024
Quantitative analysis and comprehensive evaluation of coarse aggregate morphology for asphalt pavement
Frontiers in Materials
doi 10.3389/fmats.2024.1374752
- 2,577 views
- 1 citation
Original Research
Published on 26 Mar 2024
Narrowing of band gap and decrease in dielectric loss in La1-xSrxMnO3 for x = 0.0, 0.1, and 0.2 manganite nanoparticles
Frontiers in Materials
doi 10.3389/fmats.2024.1369122
- 4,024 views
- 10 citations
Original Research
Published on 26 Mar 2024
Bending performance of prefabricated ultra-thin UHPC unit plate reinforced orthotropic steel bridge decks
Frontiers in Materials
doi 10.3389/fmats.2024.1380316
- 3,890 views
- 4 citations
Original Research
Published on 25 Mar 2024
Electron conduction mechanism in indium oxide and its implications for amorphous transport
Frontiers in Materials
doi 10.3389/fmats.2024.1380180
- 4,129 views
- 3 citations
Editorial
Published on 25 Mar 2024
Editorial: 2022 Retrospective: colloidal materials and interfaces
Frontiers in Materials
doi 10.3389/fmats.2024.1393837
- 1,848 views
Original Research
Published on 21 Mar 2024
Poly(lactic acid)/ poly(ε-caprolactone) blends: the effect of nanocalcium carbonate and glycidyl methacrylate on interfacial characteristics
Frontiers in Materials
doi 10.3389/fmats.2024.1377340
- 6,166 views
- 8 citations
Original Research
Published on 21 Mar 2024
Onsite and laboratory assessment of repair mortars for reinforced concrete floor slabs in heritage buildings
Frontiers in Materials
doi 10.3389/fmats.2024.1370921
- 3,879 views
- 2 citations
Review
Published on 20 Mar 2024
Programmable mechanical metamaterials: basic concepts, types, construction strategies—a review
Frontiers in Materials
doi 10.3389/fmats.2024.1361408
- 15,807 views
- 23 citations
Original Research
Published on 19 Mar 2024
Experimental study on the disintegration behavior and mechanism of red-bed mudstone in guangxi, China
Frontiers in Materials
doi 10.3389/fmats.2024.1357116
- 4,216 views
- 5 citations
Original Research
Published on 19 Mar 2024
Shear performance of headless studs in ultra-high performance concrete bridge deck
Frontiers in Materials
doi 10.3389/fmats.2024.1379386
- 4,891 views
Original Research
Published on 18 Mar 2024
Utilization of response surface methodology to optimize the mechanical behaviour of flax/nano TiO2/Epoxy based hybrid composites under liquid nitrogen environment
Frontiers in Materials
doi 10.3389/fmats.2024.1344351
- 3,312 views
- 12 citations
Original Research
Published on 15 Mar 2024
A novel design of hard-magnetic soft switch array for planar and curved surface applications
Frontiers in Materials
doi 10.3389/fmats.2024.1385988
- 3,503 views
- 3 citations
Original Research
Published on 14 Mar 2024
Study on microstructural and mechanical properties of cementitious materials composed of fly ash and dacite powder
Frontiers in Materials
doi 10.3389/fmats.2024.1267197
- 3,539 views
- 3 citations
Original Research
Published on 13 Mar 2024
Research on temperature field reconstruction technology for single-dome combustion chambers based on flame image
Frontiers in Materials
doi 10.3389/fmats.2024.1339375
- 3,350 views
- 1 citation
Original Research
Published on 13 Mar 2024
Effect of carbide slag and steel slag as alkali activators on the key properties of carbide slag-steel slag-slag-phosphogypsum composite cementitious materials
Frontiers in Materials
doi 10.3389/fmats.2024.1353004
- 6,759 views
- 18 citations
Original Research
Published on 13 Mar 2024
Rheological and chemical indices to characterize long-term oxidative aging of SBS/rubber composite-modified asphalt binders
Frontiers in Materials
doi 10.3389/fmats.2024.1346754
- 4,336 views
- 4 citations
Original Research
Published on 12 Mar 2024
Influence of print speed and nozzle diameter on the fiber alignment in 3D printed ultra-high-performance concrete
Frontiers in Materials
doi 10.3389/fmats.2024.1355647
- 6,765 views
- 17 citations
Editorial
Published on 12 Mar 2024
Editorial: Recent advances in the identification of stress-strain states of materials
Frontiers in Materials
doi 10.3389/fmats.2024.1393286
- 2,696 views
- 1 citation
Original Research
Published on 07 Mar 2024
Optimization of surface roughness in milling of EN 24 steel with WC-Coated inserts using response surface methodology: analysis using surface integrity microstructural characterizations
Frontiers in Materials
doi 10.3389/fmats.2024.1269608
- 9,147 views
- 182 citations
Original Research
Published on 06 Mar 2024
Thermal transport of glasses via machine learning driven simulations
Frontiers in Materials
doi 10.3389/fmats.2024.1369034
- 3,875 views
- 13 citations
Correction
Published on 06 Mar 2024
Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants
Frontiers in Materials
doi 10.3389/fmats.2024.1388987
- 1,070 views
Original Research
Published on 04 Mar 2024
Impact of ethanol-assisted and non ethanol-assisted mixing methods on the mechanical properties of impregnated polymethylmethacrylate with MgO and Ag nanoparticles
Frontiers in Materials
doi 10.3389/fmats.2024.1340409
- 2,189 views
- 1 citation
